On an SX125, the waste ink pad is located at the bottom right side of the printer (under the capping station). When you run 200+ cleaning cycles, that sponge becomes saturated.
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Printer not in maintenance mode | Repeat the button combination exactly. The SX125 is picky with timing. | | Function not supported | Wrong program version | You need the SX120 series program. SX130-only versions will fail. | | Timeout error | USB buffer issue | Disable "USB Selective Suspend" in Windows Power Options. | | Counter reset failed | EEPROM write protection | Power cycle and retry. If persists, the EEPROM chip may be physically failing. | | 20000100 | Printer is still in busy state | Unplug all USB devices except the printer. Reboot PC. | Part 7: Should You Use the Adjustment Program or Just Buy a New Printer? The Epson SX125 is an entry-level all-in-one. On the used market, it is worth $20–$30. A new waste ink reset service at a shop costs $50. epson adjustment program sx 125 work
Yes, it works flawlessly – provided you respect three rules: use the correct SX120 series software, enter maintenance mode correctly, and physically address the waste ink overflow within a few months. On an SX125, the waste ink pad is
The solution to bypass this lock is the . But simply downloading the program is not enough. You need to understand how it works specifically for the SX 125 model . The SX125 is picky with timing
After 5–10 seconds, a green checkmark will appear. The program has successfully worked on your SX125. Turn the printer off, wait 10 seconds, and turn it back on. The "Service Required" error should be gone. Part 5: The Critical Warning – Physical Waste Ink Overflow Here is where most online guides lie to you. The adjustment program resets the counter , but it does not empty the physical sponge.