Specs — Sony Lbtv702

The 6.5-inch polypropylene woofer provided a surprising amount of low-end extension (35Hz) which is rare for a mini system. The 6-ohm impedance allowed the amp to draw more current than 8-ohm speakers, generating more perceived volume. 7. Physical Dimensions & Weight If you’re buying a vintage LBT-V702, measure your space. This is not a compact unit.

The high-speed dubbing could copy an entire 60-minute CD to a 60-minute cassette in about 30 minutes. The auto-reverse meant you didn’t flip the tape. 6. Speaker System (SS-V702) Specifications The speakers are often why this system still sounds better than modern compact Bluetooth speakers. They are large, bass-reflex cabinets. sony lbtv702 specs

| Specification | Detail | |---------------|---------| | | 3-Way, Bass Reflex (Rear ported) | | Woofer | 6.5 inches (16 cm) – Polypropylene cone | | Midrange | 2 inches (5 cm) – Paper cone | | Tweeter | 0.75 inches (1.9 cm) – Piezoelectric / Film type | | Nominal Impedance | 6 ohms (This is critical – do not use with 8 ohm only amps) | | Sensitivity (SPL) | 88 dB (1W/1m) | | Power Handling Capacity | 200 Watts (Peak) / 120 Watts (RMS) | | Frequency Range | 35 Hz – 20,000 Hz | | Crossover Frequency | 3,000 Hz (approx) | | Dimensions (H x W x D) | 13.75 x 10.5 x 12.25 inches (approx) | Physical Dimensions & Weight If you’re buying a

The LBT-V702 isn't just a stereo. It's a statement from an era when Sony truly dominated the consumer audio world. The auto-reverse meant you didn’t flip the tape

The 120W RMS per channel is substantial. To put it in perspective, a typical 2024 soundbar might use 30W total. The V702 could drive large, inefficient speakers without clipping. The high damping factor (50) gave it tight, controlled bass response. 3. Tuner (Radio) Specifications The built-in tuner was a digital PLL (Phase-Locked Loop) synthesizer, offering excellent reception for its time.